Installing Garage Doors Made Easy with these 3 Basic Steps
Installing a garage door is feasible if you will understand the basics to complete the whole process. Anyone can complete this project in just a few hours. To understand the basics of garage door installations including all the details you need to know are both what this article will help you with. Tools, help, and time are the three things you will need to complete it. The 3 basic steps that you will need to understand to get you started with the installation are the following.
Preparation Phase. The whole process on your manufacturer's manual must be reviewed first before even starting the work. You will be able to anticipate what step is coming next and tools you are going to need by reading the manual. It will supersede any other guides by the instructions you will find on the manual. You have to make an inventory of all the parts you are going to need after reviewing the manual. The parts needed are usually listed in the manual. For an easier and systematic process, it is best to organize the parts into piles. Including a ladder, gather all the tools and materials you are going to need. The first panel must be prepared before installing it. The hinges on left and right of the first panel are left into the roller.
Installation Phase. It is important that the first panel must be able to cover the opening. They are about 7 feet high and 9 feet wide for most standard garage doors. The curved parts, vertical and horizontal of the track are separated and attached in separate steps. The vertical track is recommended to be installed first using slide rollers onto end of the track of the first panel. Make sure to lower it in place. The track must be centered in the opening. Tighten the brackets all the way until the next panel. The experts from Durham Garage Door Repair and Installation suggest that to install the second panel, it is best to get help because the outside hinges must be attached first before the panel can be put in place. Installing the hinges and rollers are subsequently done. Before you can install the second panel, it is best to pre-drill the holes first. The track up the wall, the door level, and the vertical track, all must be secured and plumb. The torque tube and curved tracks is advised to be installed by a professional to avoid repeating the whole process.
Post-Installation Phase. Remove all obstacles including the ladder. If it is necessary, make adjustments to position the track. Check the garage door spring, rollers, horizontal tracks, and the positioning of the door.
Understanding these 3 basic steps will surely help you complete a garage door installation by Durham Garage Door Openers successfully.